Wooden Boot Rack | How to Make

RichardMake Projects

Featured Video Play Icon

I made this video before I had a table saw, so I ripped the plywood to width using a Black and Decker circular saw using a shop made guide.

The steps I go through to make the boot rack are…
Rip the plywood to length
Sand off rough edges
Cut to rough length by hand using a bench hook
Laminate the two piece of plywood together using Gorilla Woodglue
Mark the holes using my shop made template guide
Drill out the holes with an Axminster Pillar drill
Mark and cut the dowels to length using the bench hook
Glue and knock in the dowel pegs
Sand down and finish with four coats of Danish Oil

Things I am using Erbauer Compound Mitre Saw http://amzn.to/2fqDShl Black and Decker Corded Drill https://amzn.to/2PR0WJI
=======================
👍 Follow, like and comment 😎
======================.
If you liked this post why not….
Check out the Fix Make Create Merch
Subscribe on Youtube
Like us on Facebook
Follow us on Twitter
Love us on Instagram
AND SUBSCRIBE TO THE NEWSLETTER BECAUSE YOU READ TO THE BOTTOM!
[/cs_column][/cs_row][/cs_section]